PORSCHE 911 GAS CAP
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance.
Applications: street, drag, pulling, autocross. The flag...(choose a part on the right to read more)
General Fitment 930 1975-77
From $1,049.95
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler, k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit, headers, 3.8l p/c, sport camshafts
Genuine:
Engine - 6cyl. Boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 309kw (415hp) @ 6000rpm
Max. Torque - 560nm (413lbf ft) @ 3500-4500rpm
Max. Speed - 305km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.2s
Tuning:
Max. Power - 449kw (610hp) @ 6750rpm
Max. Torque - 830nm(612lbf ft) @ 4500rpm
Max. Speed - 339km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.3s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of p...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$43,366.05
Make a selection
Kit includes:
Software fast load, sport air filter, sportmuffler
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 386kw (525hp) @ 6000rpm
Max. Torque - 755nm (557lbf ft) @ 4500rpm
Max. Speed - 329km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$7,576.25
Make a selection
Kit includes:
Software fast load., sport air filter, sportmuffler (100 cell sport catalytic), k24/26 turbocharger l/r, 5.0bar fuel-pressure-regulator, air-powerflow kit
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,4:1
Max. Power - 340kw (462hp) @ 5700rpm
Max. Torque - 620nm (457lbf ft) @ 3500-4500rpm
Max. Speed - 318km/h
Max. Rpm - 6750rpm
Acceleration 0-100km/h - 4.0s
Tuning:
Max. Power - 423kw (575hp) @ 6500rpm
Max. Torque - 780nm @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$21,571.48
Make a selection
Kit includes:
Software fast load, sport air filter, header system, TUV sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 281kw (382hp) @ 6500rpm
Max. Torque - 430nm (317lbf ft) @ 4500rpm
Max. Speed - 305km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the yea...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,333.90
Make a selection
Kit includes:
Software fast load, sport air filter, GT sport exhaust system
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 441nm (325lbf ft) @ 4000rpm
Max. Speed - 307km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine management software. Over the years we h...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,896.70
Make a selection
Kit includes:
Software fast load, sport air filter, header system, sportmufflers and endtips 3,8l for the mufflers.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3596ccm
Compression ratio - 11,3:1
Max. Power - 239kw (325hp) @ 6800rpm
Max. Torque - 370nm (273lbf ft) @ 4250rpm
Max. Speed - 285km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.0s
Tuning:
Max. Power - 259kw (352hp) @ 7000rpm
Max. Torque - 400nm (295lbf ft) @ 4500rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 Porsche engine naturally led to our engine ma...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,542.90
Make a selection
Kit includes:
Software dme (fast load), FVD TUV muffler (200 cell catalytics), bmc sportfilter
Endtips bes 997 160 41s must be ordered seperatly.
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 408kw (555hp) @ 6000rpm
Max. Torque - 745nm (550lbf ft) @ 4000-4500rpm
Max. Speed - 325km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.6s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche en...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,818.90
Make a selection
Kit includes:
Dme upgrade ( fast load), sport air filter
Genuine:
Engine - 6 cylinder boxer
Capacity - 3600ccm
Compression ratio - 12,0:1
Max. Power - 305kw (415hp) @ 7600rpm
Max. Torque - 405nm (299lbf ft) @ 5500rpm
Max. Speed - 310km/h
Max. Rpm - 8400rpm
Acceleration 0-100km/h - 4.3s
Tuning:
Max. Power - 314kw (427hp) @ 7500rpm
Max. Torque - 420nm (310lbf ft) @ 5500rpm
Max. Speed - 315km/h
Max. Rpm - 8700rpm
Acceleration 0-100km/h - 4.1s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly reliabi...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$1,921.54
Make a selection
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 390kw (530hp) @ 6500rpm
Max. Torque - 680nm (502lbf ft) @ 2200-4500rpm
Max. Speed - 329km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.7s
Tuning:
Max. Power - 426kw (580hp) @ 6500rpm
Max. Torque - 750nm (553lbf ft) @ 4500rpm
Max. Speed - 335km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.5s
FVD dme / ecu programming philosophy:
For more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,923.90
Make a selection
Genuine: engine - 6 cylinder boxer twin-turbo capacity - 3600ccm compression ratio - 9,0:1 max. Power - 390kw (530hp) @ 6500rpm max. Torque - 680nm (502lbf ft) @ 2200-4500rpm max. Speed - 329km/h max. Rpm - 6800rpm acceleration 0-100km/h - 3.7s tuning: max. Power - 449kw (610hp) @ 6500rpm max. Torque - 780nm (575lbf ft) @ 4500rpm max. Speed - 340km/h max. Rpm - 7000rpm acceleration 0-100km/h - 3.4s FVD dme / ecu programming philosophy: for more than 20 years, FVD-Brombacherhas been setting the standard for Porsche engine management software tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivability and most importantly r...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $7,602.10
Make a selection
FVD "brombacher" level 2 tuning kit for the 2009- 997s includes includes our FVD flashload software cable, a single user diagnostic tool with software, a bmc sport airfilter and our "sound version" sport mufflers.
"sound version" sport muffler facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for a more pronounced Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust.
Genuine:
Engine - 6 cylinder ...(choose a part on the right to read more)
General Fitment 911 2009-12
$3,419.90
Make a selection
FVD "brombacher" level 3 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software, bmc sport air filter and our "brombacher" stainless steel TUV exhaust system for the 997s-2 dfi.
"brombacher" exhaust system facts (based on 997s):
- + 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
- 12lbs (5 kg) weight savings
Stock:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 1...(choose a part on the right to read more)
General Fitment 911 2009-12
$9,711.90
Make a selection
FVD "brombacher" level 1 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software and a bmc sport air filter.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h (186mph)
Max. Rpm - 7500rpm
Acceleration 0-100km/h (0-60mph) - 4.5s
FVD level 1 tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 432nm (319lbf ft) @ 4500rpm
Max. Speed - 305km/h (190mph)
Max. Rpm - 7700rpm
Acceleration 0-100km/h (0-60mph) - 4.4s
For 25 years, FVD-Brombacherhas been setting the standard for Porsche tuning. We alw...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,527.90
Make a selection
Spec stage 2+ clutches feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.
Stage 2+ clutches are great for street, drag, autocross, road racing, pulling, rallye and drift events.
General Fitment 911 1970-73
Spec stage 4 clutches are basically a solid hub version of the stage 3 clutch. The hub is solid 8-rivet and the assembly is heat treated for strength and durability. It is available in a 3, 4 or 6 puck configuration. Use the 3 puck for the lightest option or the 6 puck for the smoothest engagement. The 4 puck is a good compromise for both. Street drivable in 6 puck configuration, but not street friendly due to the rigid hub. Best for drag racing, road racing, pulling, rallye and drift.
Torque capacity: 510ft/lbs
The spec stage 4 clutch is a built-to-order item; please indicate 3, 4, or 6 puck when ordering.
General Fitment 911 1970-73
What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance.
Applications: street, drag, pulling, autocross. Features...(choose a part on the right to read more)
General Fitment 911 1987-89
From $799.95
Make a selection
Spec stage 2+ clutches feature a multi-friction disc in a full faced configuration with carbon semi-metallic on one side and kevlar on the other. Bridging the gap between stage 2 and stage 3, the 2+ offers drivability and engagement quality characteristic of the stage 2, but with a 15-20% higher torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.
Stage 2+ clutches are great for street, drag, autocross, road racing, pulling, rallye and drift events.
General Fitment 911 1987-89
$1,049.95
Make a selection
Spec stage 2+ clutch Porsche 930 3.0l turbo 97-77
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performance.
Ap...(choose a part on the right to read more)
General Fitment 930 1975-77
From $939.95
Make a selection
Spec stage 1 clutches features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications.
Torque capacity: 275ft/lbs
Spec stage 1 clutches are for street and occasional track duty, with more performance ability than the stock clutch can provide.
General Fitment 911 1970-73 911 1974-77 911 1978-83 911 1984-86
What good is more horsepower if it isn't transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more 'bite' while increasing reliability and performance.
Applications: street, drag, pulling, autocross. Features...(choose a part on the right to read more)
General Fitment 911 1989-94
From $1,199.95
Make a selection
Spec stage 2+ clutch Porsche 911 3.2l Carrera 97-86
What good is more horsepower if it isn_t transferred to the ground? The clutch is the main link between the power your engine produces and the transmission, but all too often it is also the weak link. Many stock clutches simply will not last under harsh driving conditions or continual hard launches. When a car is making more horsepower than stock the factory clutch is under even more strain. This can cause premature clutch wear and costly repair bills. Spec clutch solves this problem with their line of performance clutches. With increased surface area spec clutches give your transmission more _bite_ while increasing reliability and performance.
...(choose a part on the right to read more)
General Fitment 911 1970-73 911 1974-77 911 1978-83 911 1984-86
From $699.95
Make a selection
Spec stage 3 clutches feature a carbon semi-metallic 6 puck sprung hub disc that has been the leading puck clutch in drivability, life and torque capacity. This unit is designed for street and race cars that require an aggressive but streetable engagement and high torque capacity. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability.
Spec 3 clutches are great for street, drag, road racing, pulling, rallye and drift.
General Fitment 911 1974-77
Also included with our latest software version for the 997tt & GT2 is a free single user license for durametric basic software, allowing you to read out and diagnose fault conditions on your vehicle.
Genuine:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h
Max. Rpm - 6800rpm
Acceleration 0-100km/h - 3.9s
Tuning:
Max. Power - 390kw (530hp) @ 6000rpm
Max. Torque - 720nm (531lbf ft) @ 3000-4000rpm
Max. Speed - 320km/h
Max. Rpm - 7000rpm
Acceleration 0-100km/h - 3.7s
FVD-Brombacheris proud to announce that we are now offering do-it-yourself flash load ecu ...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,754.50
Make a selection
Spec stage 1 clutches features an integrally molded carbon kevlar-based, high performance organic lining that offers smooth engagement and excellent life. This lining has an integrally bonded steel backing for strength under high clamp loads and temperatures. The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Best for street and many track/off-road applications.
Torque capacity: 410ft/lbs
Spec stage 1 clutches are for street and occasional track duty, with more performance ability than the stock clutch can provide.
General Fitment 911 1989-94 911 1994-98
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|